Study and evaluation of abrasive water jet turning process performance on AA5083

In this study, the effect of processing parameters on surface roughness and macro surface characteristics was analyzed during the machining of Ø30 mm and 300 mm aluminum alloy AA5083 abrasive water jets. As the processing parameters (up to 10 mm min⁻¹, 15 mm min⁻¹, 20 mm min⁻¹ and 25 mm min⁻¹), abrasive flow rate (50 g min⁻¹, 150 g min⁻¹, 250 g min⁻¹ and 350 g min⁻¹), the lathe chuck rotational speed (25 min⁻¹, 50 min⁻¹, 75 min⁻¹ and 100 min⁻¹) and the nozzle approach distance (2 mm, 5 mm, 8 mm and 11 mm) were used in experiments. In experimental studies, the pump pressure (360 MPa) was used as a constant, in the form of an abrasive Garnet (100 mesh), and the nozzle diameter as 0.76 mm. According to the findings, the best results in terms of surface roughness were obtained as a result of turning speed and abrasive flow rate. When the macro surface characteristics were examined, it was found that the lathe chuck rotational speed increased, the rate of nozzle progression was low, the rate of abrasive flow was high and the nozzle approach distance was lower and the smoother surfaces were obtained.     

Influence of additive materials on the roughness of AISI D2 steel in electrical discharge machining (EDM) environment

The quality of the machined surface resulted from the electrical discharge machining (EDM) environment is not efficient according to the previous studies. One of the significant problems is the impedance of dielectric fluid, where it is contributing to focusing the plasma channel in a limited area. Hence, this behavior leads to appearing deep craters on the machined zone. The researchers have attempted to enhance the average of surface roughness by employing powder particles or surfactant as the additive materials in the dielectric fluid. Unfortunately, these studies did not present a comparison between these additive materials in this environment. Therefore, the present study aims to compare the performance of the average of surface roughness (R_a) for AISI D2 steel by utilizing Nano chromium powder (NCP) and Span-20. The present work has proved that the behavior of the average of surface roughness for this steel is dropping at the maximum level of Nano chromium powder concentration and pulse duration as compared to the behavior with the Span-20. Moreover, the best roughness was produced by this steel with Nano chromium powder at 2 g/L and 20 μs for this powder and the pulse duration.     

The Effect of Addition of High-Melting Monoacylglycerol and Candelilla Wax on Pea and Faba Bean Protein Foam-Templated Oleogelation

Use of oleogels prepared from hydrocolloids has recently gained considerable attention as an alternative for trans and saturated fats. Lately, pulse proteins such as faba bean protein and pea protein have been successfully used to prepare oleogels using a foam-templated approach. Although the pulse proteins are healthy oleogelators, high oil loss and low quality of cake baked using pulse protein-stabilized oleogels due to its poor rheological properties challenged its use. The present study explored whether the addition of small amount of high-melting monoglyceride (MAG) or candelilla wax (CW) can be used to improve the oil binding capacity, rheological properties, and baking qualities of pulse protein-stabilized oleogels composed of 5% faba bean or pea protein concentrate with 0.25% xanthan gum foams. Different concentrations (0.5–3%) of MAG or CW were dissolved in canola oil at 80 °C, followed by addition into the freeze-dried protein-polysaccharide foams (pH 7) and quickly transferred to a refrigerator to facilitate the formation of oleogels. The crystallized additives were found to be reinforcing the protein foam network in the oleogels. With increase in concentration of CW and MAG, the oil binding capacity, firmness, cohesiveness, and storage moduli of the oleogels were increased. Oleogels with and without MAG or CW were then characterized and tested for their performance as a shortening replacer in model baked cakes. Findings showed improved textural properties of cake upon addition of MAG in the foam-templated oleogels, however, compared to the shortening, negative effect on cake hardness and chewiness was still observed with the oleogels.     

Effect of vegetative bed on flow structure through a pool-riffle morphology

Natural habitats are created and developed through pool-riffle sequences in rivers, while vegetation cover could play a critical role in the sediment transfer and its quantity and quality. In this study, the effect of vegetation cover on the flow structure in a pool-riffle sequence is investigated in a laboratory flume under bed formation to compare with non-vegetated cover. In this context, instantaneous point velocities were measured by ADV to determine averaged velocity, shear velocity, root mean square velocity, friction factor, Reynolds shear stress and turbulence intensities. Results showed that the vegetation cover increases the thickness of the wall law. Meanwhile, the length of the flow separation zone in the vegetated bedform is more than in the non-vegetated bedform. Variation in roughness coefficients may cause a new boundary layer in which local flow velocities decrease. In both cases (vegetated and non-vegetated bedforms), the momentum is mostly transferred by ejection and sweep phenomena between flow and bedform.     

连续时间完全服务与门限服务两级轮询系统性能研究

在信息分组以连续时间规律到达系统的基础上，对于轮询系统中不同优先级的业务问题，提出区分优先级的两级轮询服务模型。首先，在该模型中，低优先级站点采用门限服务，高优先级站点采用完全服务；然后，在高优先级转低优先级时，将传输服务与转移查询并行处理来降低服务器在查询转换期间所耗费的时间，提高轮询系统的效率；最后，运用马尔可夫链和概率母函数的方法建立了系统的数学模型，通过对数学模型精确解析，得到了连续时间两级服务系统每个站点的平均排队队长和平均等待时间的表达式，精确解析出平均排队队长和平均等待时间的值。仿真实验结果表明：理论计算值与实验仿真值近似相等，说明理论分析正确合理。该模型既能保障低优先级站点服务质量，又能为高优先级站点提供优质服务。     

Experimental study on the effect of lateral concentrated smoke extraction on smoke stratification in the longitudinal ventilated tunnel

Smoke is the main cause of death in tunnel fires. It is one of the important measures to maintain smoke stratification in the early stage of tunnel fire. This article focused on experimentally studying the combined effect of lateral concentrated smoke extraction and longitudinal ventilation on the smoke stratification, which never be revealed before. The velocity of the smoke layer and air layer, vertical temperature distribution, and the flow patterns of the smoke were measured. It was found that the longitudinal ventilation and lateral concentrated smoke extraction would affect the flow of the smoke and change the shear velocity between the smoke layer and air layer, then, the patterns of the smoke layer will be affected. And the flow patterns with Froude (Fr) number can be classified into three categories: (a)Fr < 0.6 , with stable smoke stratification; (b) 0.6 < Fr < 0.85 , with a stable smoke stratification but the blurring interface; and (c) Fr > 0.85 , the smoke layer is completely unstable. The result can provide a reference for ventilation design of immersed tube tunnels.     

宁夏红寺堡盆地隐伏古隆起成因机制及其对区域沙漠化的影响

目前对于青藏高原东北缘活动构造研究多集中于活动断裂带的活动性,而对夹持于其间的沉积盆地构造格架及活动性研究甚少。以夹持于烟筒山断裂与牛首山—罗山断裂之间的宁夏红寺堡盆地为研究对象,采用重力资料重处理解译、音频大地电磁测深(AMT)和地震勘探相结合,揭示红寺堡盆地隐伏构造特征,并进一步采用盆山一体化思路分析隐伏构造的成因机制及其对区域沙漠化的控制作用。结果表明:青藏高原在中新世末发生强烈的NE向推挤、扩展和隆升,红寺堡盆地由坳陷盆地转变为挠曲盆地; 在青藏高原NE向扩展的影响下,烟筒山断裂发生强烈的逆冲作用,古生代—中生代基底逆冲于古近系—新近系之上,受构造变形影响的最新地层为中新统彰恩堡组; 红寺堡盆地内的隐伏古隆起呈NW—SE向,与烟筒山构造带具有相同的构造动力学背景,受青藏高原NE向扩展影响形成于中新世末,并且至今仍具有活动性; 隐伏古隆起周缘断裂的活动破坏了地表稳定性、蓄水能力和地表植被,导致区域沙漠化呈现有规律的NW—SE向带状展布。该研究成果对于宁夏红寺堡盆地区域稳定性评价及沙漠化的综合治理具有现实指导意义。